| Peer-Reviewed

Determination of Added Mass and Inertia Moment of Marine Ships Moving in 6 Degrees of Freedom

Received: 16 March 2016     Accepted: 30 March 2016     Published: 25 April 2016
Views:       Downloads:
Abstract

When a ship moves in water with acceleration or deceleration, quantities of fluid moving around the hull creating additional hydrodynamic forces acting on the hull. It is imagined as the added mass which increases the total system mass and inertia moment. In order to establish the mathematical model for ship motion, the added components need to be determined. For a particular ship, these hydrodynamic components can be obtained by experiment. However, for ship simulation especially at the initial design stage it is necessary to calculate and estimate by theoretical method. This study aims to find out a general method to calculate all components of added mass and inertia moment in 6 degrees of freedom for simulating ship movement.

Published in International Journal of Transportation Engineering and Technology (Volume 2, Issue 1)
DOI 10.11648/j.ijtet.20160201.12
Page(s) 8-14
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2016. Published by Science Publishing Group

Keywords

Added Mass, Hydrodynamic Coefficient, Mathematical Modeling, Ship Simulation

References
[1] THOR I. FOSSEN, Handbook of Marine Craft Hydrodynamics and Motion Control, Norwegian University of Science and Technology Trondheim, Norway, John Wiley & Sons, 2011.
[2] EDWARD M. LEWANDOWSKI, The Dynamics Of Marine Craft, Manoeuvring and Seakeeping, World Scientific, Vol 22, 2004, pp. 35-54.
[3] HABIL. NIKOLAI KORNEV, Lectures on ship manoeuvrability, Rostock University Universität Rostock, Germany, 2013.
[4] ALEXANDR I. KOROTKIN, Added Masses of Ship Structures, Krylov Shipbuilding Research Institute - Springer, St. Petersburg, Russia, 2009, pp. 51-55, pp. 86-88, pp. 93-96.
[5] J. P. HOOFT, “The Prediction of the Ship’s Manoeuvrability in the Design Stage”, SNAME transaction, Vol. 102, 1994, pp. 419-445.
[6] J. M. J. JOURNÉE & L. J. M. ADEGEEST, Theoretical Manual of Strip Theory Program “SEAWAY for Windows”, Delft University of Technology, the Netherlands, 2003, pp. 53-56.
[7] TRAN CONG NGHI, Ship theory – Hull resistance and Thrusters (Volume II), Ho Chi Minh city University of Transport, 2009, pp. 208-222.
[8] NILS SALVESEN, E. O. TUCK và ODD FALTISEN, Ship Motions and Sealoads, The Society of Naval Architects and Marine Engineers, No. 6, 1970.
[9] BIRKHOFF, G., Hydrodynamics, Princeton University Press, Princeton, 1960.
[10] LAMB, G., Hydrodynamics, Cambridge University Press, Cambridge, 1932.
[11] F. URSELL, On the Heaving Motion of a Circular Cylinder on the Surface of Fluid, Quarterly Journal of Mechanics and Applied Mathematics, Vol II, 1949.
[12] W. Frank, Oscillation of Cylinders in or below the Free Surface of Deep Fluids, Technical Report 2375, 1967, Naval Ship Research and Development Centre, Washington DC, USA, 1967.
[13] H. KEIL, Die hydrodynamischen Kräfte bei der periodischen Bewegung zweidimensionaler Körper an der Oberfläche flacher Gewässer, Ber. Nr. 305. Institut für Schiffbau. Univ. Hamburg, Deutschland.
[14] Seizo Motora, On the Measurement of Added Mass and Added Moment of Inertia for ship Motions, Journal of Zosen Kiokai, No. 107, 1960.
Cite This Article
  • APA Style

    Do Thanh Sen, Tran Canh Vinh. (2016). Determination of Added Mass and Inertia Moment of Marine Ships Moving in 6 Degrees of Freedom. International Journal of Transportation Engineering and Technology, 2(1), 8-14. https://doi.org/10.11648/j.ijtet.20160201.12

    Copy | Download

    ACS Style

    Do Thanh Sen; Tran Canh Vinh. Determination of Added Mass and Inertia Moment of Marine Ships Moving in 6 Degrees of Freedom. Int. J. Transp. Eng. Technol. 2016, 2(1), 8-14. doi: 10.11648/j.ijtet.20160201.12

    Copy | Download

    AMA Style

    Do Thanh Sen, Tran Canh Vinh. Determination of Added Mass and Inertia Moment of Marine Ships Moving in 6 Degrees of Freedom. Int J Transp Eng Technol. 2016;2(1):8-14. doi: 10.11648/j.ijtet.20160201.12

    Copy | Download

  • @article{10.11648/j.ijtet.20160201.12,
      author = {Do Thanh Sen and Tran Canh Vinh},
      title = {Determination of Added Mass and Inertia Moment of Marine Ships Moving in 6 Degrees of Freedom},
      journal = {International Journal of Transportation Engineering and Technology},
      volume = {2},
      number = {1},
      pages = {8-14},
      doi = {10.11648/j.ijtet.20160201.12},
      url = {https://doi.org/10.11648/j.ijtet.20160201.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijtet.20160201.12},
      abstract = {When a ship moves in water with acceleration or deceleration, quantities of fluid moving around the hull creating additional hydrodynamic forces acting on the hull. It is imagined as the added mass which increases the total system mass and inertia moment. In order to establish the mathematical model for ship motion, the added components need to be determined. For a particular ship, these hydrodynamic components can be obtained by experiment. However, for ship simulation especially at the initial design stage it is necessary to calculate and estimate by theoretical method. This study aims to find out a general method to calculate all components of added mass and inertia moment in 6 degrees of freedom for simulating ship movement.},
     year = {2016}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Determination of Added Mass and Inertia Moment of Marine Ships Moving in 6 Degrees of Freedom
    AU  - Do Thanh Sen
    AU  - Tran Canh Vinh
    Y1  - 2016/04/25
    PY  - 2016
    N1  - https://doi.org/10.11648/j.ijtet.20160201.12
    DO  - 10.11648/j.ijtet.20160201.12
    T2  - International Journal of Transportation Engineering and Technology
    JF  - International Journal of Transportation Engineering and Technology
    JO  - International Journal of Transportation Engineering and Technology
    SP  - 8
    EP  - 14
    PB  - Science Publishing Group
    SN  - 2575-1751
    UR  - https://doi.org/10.11648/j.ijtet.20160201.12
    AB  - When a ship moves in water with acceleration or deceleration, quantities of fluid moving around the hull creating additional hydrodynamic forces acting on the hull. It is imagined as the added mass which increases the total system mass and inertia moment. In order to establish the mathematical model for ship motion, the added components need to be determined. For a particular ship, these hydrodynamic components can be obtained by experiment. However, for ship simulation especially at the initial design stage it is necessary to calculate and estimate by theoretical method. This study aims to find out a general method to calculate all components of added mass and inertia moment in 6 degrees of freedom for simulating ship movement.
    VL  - 2
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Maritime Education and Human Resource Center (UT-STC), Ho Chi Minh City, Vietnam

  • Faculty of Navigation, Ho Chi Minh City University of Transport, Ho Chi Minh City, Vietnam

  • Sections